TECEbase toilet module with Base cistern, installation height 1120 mm Toilet module including “easy fit” flush plate installation. For single block assembly, as a pre-wall module in front of solid walls, and for incorporation into metal or wooden stud walls. Base cistern for front actuation: Safety tank made of impact-resistant plastic, tested to EN 14055 Cistern fully pre-assembled Cistern connection with outer thread R 1/2" at the top, compatible with quick adapters 3-way stop valve; shut-off valve with flush function with installed filling valve 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; remaining volume can be used for immediate cleaning flush. Insulated against condensation water For TECE flush plates and toilet flush handle Can be used as a single or dual-flush cistern “easy fit” flush plate installation Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109 Module frame: Self-supporting, powder-coated Two M 12 retaining bolts and nuts Mounting set for solid walls Toilet drain bend DN 90 with joint adapter DN 90/100, made of PP Joint adapter also suitable for horizontal installation DN 90 toilet connection set including protective plug Please order separately: Toilet flush plate Insert chute for cleaning tablets (optional) TECEone upgrade set for dry-wall construction Shell structure/fine installation set to connect an electronic shower toilet Note: If toilet ceramics with a reduced supporting surface are used (= distance from middle of fixing bolt to lower edge of supporting surface is not larger than 18 cm) - e.g. V & B Memento, Sentique, Subway 2.0 - it is necessary to install the steel brace set 9041029 in the lower build space.