Bently Nevada 330707-00-62-10-02-00 Proximity Probe | 3300 XL Sensor

Product Short DescriptionBently Nevada 330707-00-62-10-02-00 proximity probe1.0 m cable with 5/8-18 UNF threadWide temperature range and stable signalStrong stainless steel industrial designProduct OverviewThe 3300 XL 11mm Proximity Probe is designed for accurate vibration and position monitoring. It uses a PPS probe tip and stainless steel housing. It works well in high heat and harsh industrial environments.Manufacturer: Bently NevadaModel: 330707-00-62-10-02-00Series: 3300 XL 11mm ProbeOrigin: Made in U.S.AShipping weight: 0.17 kgWarranty: 12 monthsShipping: FedEx / UPS / DHLModel Code Structure330707-00-62-10-02-00 └─ 330707 └─ 3300 XL 11 mm probe, 5/8-18 UNF, no armor └─ 00 → Unthreaded length: 0.0 in └─ 62 → Case length: 6.2 in └─ 10 → Total cable: 1.0 m └─ 02 → ClickLoc connector └─ 00 → No agency approval Core Technical SpecificationsProbe tip: Polyphenylene sulfide (PPS)Case material: AISI 304 stainless steelCable: 75 Ω triaxial FEP insulatedDC resistance (1 m): 5.9 ± 0.5 ΩOperating temperature: −52°C to 177°CMinimum bend radius: 25.4 mmThread type: 5/8-18 UNFMax thread engagement: 0.938 inRecommended torque: 15.2 N·mMax torque: 45.2 N·mExtended Engineering ParametersTypical sensitivity: 7.87 V/mmSignal linearity: ≤ ±1%Connector: Gold-plated brassInsulation resistance: >100 MΩ @ 500 VDCHumidity tolerance: 95% non-condensingVibration endurance: 50 g peakSeal: Viton O-ring pressure sealTemperature ClassificationT1: −55°C to 232°CT2: −55°C to 177°CT3: −55°C to 120°CT4: −55°C to 80°CT5: −55°C to 40°CExposure below −34°C may reduce seal life.Product AdvantagesStable signal in high temperature zonesStrong corrosion resistanceCompact size for tight spacesLow noise cable designLong service lifeFast ClickLoc installationProfessional FAQHow do I select the correct cable length?Measure the routing path first. Use 1 m for short runs. Choose longer cables for distant mounting.Is the probe suitable for high vibration machines?Yes. It is built for turbines and rotating equipment with strong shock resistance.What installation error should I avoid?Do not exceed the torque rating. Over-tightening can damage threads and seals.How often should maintenance checks be done?Inspect during planned shutdowns. Check cable wear and connector tightness.Is this probe safe for high temperature turbines?Yes. It operates up to 177°C. Always confirm your ambient class rating before purchase.Contact InformationInquiries: [email protected] | 86 158 8020 0923Copyright © 2026 Oiltech Controls Limited. All rights reserved.Original Source: https://www.oiltechcontrols.com/Partner PLCDCS HUB Limited. All rights reserved.Powergear X Automation Limited